Mounts theme continued

Have heard comments about 034efi solid motorsport engine mounts from very respected person. It was more like horror story, not the comments. Excessive vibrations, bolts loosing tension under vibration , etc. Nylon theme is suspended a bit.
Also had a chat with rally guys. They told me, that load's of ppl are using old 4x4 VAZ engine mounts for rally. Which are silly cheap - about 3$ each. Went to local parts store, and bought some. They are damn too small:You can clearly see, that those 4x4 mounts are solid rubber. Russian made things sometimes last very very well, no matter how crude they are made :). The problem is, that the thread is using M10x1.25 pitch (normal mounts use conventional M10, which is 1.5). Also mount heigh, if I want to put it in the old "cup", is almost twice shorter than needed. Will need to think some strong and elegant solution (it will turn to be weak and horrible to make - as usual :D).

Also manged to change toe settings a bit on the front. Don't know if it's related, the car responded with better turn in to the corners, however horrible vibrations on the steering appeared. Maybe I have tightened wheel incorrectly. I hope so.